Pelco digital sentry ubiquiti manuals#
Pelco digital sentry ubiquiti manual#
Pelco digital sentry ubiquiti software#
Pelco digital sentry ubiquiti password#

Please change the mapping type to “Manual” and then dick to modify the port until the UPnP status turns to ‘valid UPnP’. If the UPnP status is still “Invalid UPnP” after refreshing it several times. Click Refresh” button to refresh the UPnP status.Enable the UPnP function in the router.Go to Start Settings -) Network -) UPnP, and enable UPnP and then click the “Apply” button to save.You can use the UPnP function to enable a fast connection of the device to WAN via a router without port mapping. And here the IP address of the IP camera must be a WAN IP address. The IP camera must be connected over WAN. Click “Add Camera” and select “Manually Add” to add IP cameras.

Pelco digital sentry ubiquiti password#

Input static IP address or enable PPPoE and then Input the user name and password received from your ISP. You may select the added device and click to modify channel, IP address etc. “Online” status means connecting the device successfully and you will see the live image. The DVR will automatically refresh the cameras and return to the “Edit Camera” interface. If the IPC searched is not in the same local network as the DVR, you should select the device and click to modify the IP address.ĥ Highlight the device you want to add and then click the “Add” button. The IPC which supports the Onvif protocol may be added manually. The DVR will automatically refresh the cameras searched. Input HTTP port (the default value is 80), server port (the default port is 6036).Ĥ Go to Start. If using DHCP, please enable DHCP in both the DVR and the router.Ģ Go to Start Settings. Input IP address, subnet mask, gateway, etc. Network Configuration & Adding IP Camerasġ Set the network of the DVR.

Pelco digital sentry ubiquiti manual#

Please refer to User Manual for details.ħ. The actual signal input shall correspond to the video mode. Settings -) Camera -) Manage Camera -) Signal Access Set to checkmark the video mode. Enter username and password and click the “Login” button to go to the main menu setup.Ĭamera Connection First connects the cameras to the DVR. The default username is “admin”, and the default password is “123456”. The default username is “admin” and the password is set by you when you configure the wizard for the first time. You can skip the settings of the wizard next time. You must configure the wizard when you start the DVR for the first time. The device will shut down by clicking the “OK” button. Go to “Main Menu” and then select the “Shutdown” icon.

The device will boot up and the power indicator will display blue.

Control locally via USB Mouse or IR Remote control.

Supports both Dynamic and Static IP Addresses.

Pelco digital sentry ubiquiti software#

Mac OS® Client & CMS Central Management Software Included.Remote Viewing over the Internet via Web Browser or LAN.

8 SATA2/3 HDD Slots supporting up to 80TB (8 x 10TB HDD) Internal Storage + 1 x e-SATA.

Pentaplex: Live Display / Record / Playback / Backup / Remote Access.

PTZ Control over RS-485 / Control over Coax (CoC).Free VMS (Video Management Software) Lite and Standard versions available for organized viewing of multiple sites.Audio In: RCA × 16 * + Output: RCA × 1 *Connector is Included.Fully Programmable Intelligent Analytics including Object Removal / Museum Search, Exception, Line Crossing, and Area Intrusion Detection (IP Camera Dependent).Simple plug and play, point-to-point connection from camera to DVR.8-Channel Additional IP Camera Support up to 5 MegaPixel 30fps (40 Cameras Total), with Ability to Change up to 16 HDA Inputs into IP Inputs.HD-TVI / AHD / CVI / CVBS BNC Inputs Supporting up to 5MP Lite + IP Support

Pelco digital sentry ubiquiti manuals#

7.1 Related Manuals / Resources KEY FEATURES: